Industrial cabinet, liquid cooled
PentaVault Citadel, 261 kWh
Industrial-grade storage for real loads. A liquid-cooled cabinet with a built-in dehumidifier, perfluorohexanone plus aerosol fire suppression, and physically separated electrical and hydraulic circuits. Supports parallel scaling for higher capacity, with certifications for grid-tied deployment.
- Nominal energy
- 261 kWh
- Continuous power
- 125 kW, 137 peak
- System voltage
- 832 V, 1P52S
- Cooling and rating
- Liquid, IP54
In place
What the Citadel looks like where it lives
A liquid-cooled cabinet with a built-in dehumidifier, perfluorohexanone plus aerosol fire suppression, and physically separated electrical and hydraulic circuits. Supports parallel scaling for higher capacity, with certifications for grid-tied deployment.
The cabinet is designed to be seen by the people who maintain it rather than hidden away, with the status display and service access at the front and the cooling circuit reachable without moving the unit.
- Nominal energy: 261 kWh
- Continuous power: 125 kW, 137 peak
- System voltage: 832 V, 1P52S
- Cooling and rating: Liquid, IP54

Where it fits
The sites this cabinet is built for
The factory and the production line
Shave peak-tariff hours by discharging when the grid is most expensive. Carry the line through outages so production does not lose a shift. Scale in parallel to match the connected load.
The telecom site and the data closet
Replace ageing lead-acid banks with a single sealed cabinet. Liquid cooling holds capacity in 45-plus-degree shelters, and IP54 puts outdoor placement on the table.
The commercial property and retail anchor
Run HVAC, refrigeration and lighting through extended outages. Pair with a rooftop array to convert wasted curtailment into stored energy used after dark.
The commercial case
Why the peak matters more than the units
An industrial tariff charges for the highest half hour of demand recorded across the whole month, not only for the energy consumed. One badly timed simultaneous start can set a charge you then pay on every subsequent bill.
Discharging the Citadel through those peaks lowers the recorded maximum demand. On sites with a pronounced peak profile this single effect can move the bill more than the solar generation does.
Specifications
Full technical specification
Every figure carries a unit, and cycle life is published against a residual capacity threshold rather than quoted bare.
| Capacity | 261 kWh |
|---|---|
| Model | PV-261 |
| Chemistry | LiFePO4 |
| Nominal voltage | 832 V |
| Nominal capacity | 314 Ah |
| Configuration | 1P52S |
| Max discharge | 125 kW |
| Peak, 5 seconds | 137 kW |
| Cycle life at 70% | approximately 6,000 |
| Depth of discharge | 98% |
| Operating temperature | minus 30 to 55 C |
| Cooling | Liquid with dehumidifier |
| Fire protection | Perfluorohexanone and aerosol |
| Protection rating | IP54 |
| Communication | RS485 |
| Dimensions | 970 x 1400 x 2300 mm |
| Weight | 2.33 tonnes |
Questions about the Citadel
How many Citadel cabinets will my site need?
What does 125 kW continuous mean for my machines?
Why liquid cooling rather than a cheaper passive cabinet?
Can it be installed outdoors?
What are the civil works?
How is it delivered and positioned?
What monitoring do we get?
What is the maintenance requirement?
Why PentaVault
What every cabinet carries
Four promises that apply across the range, each one a behaviour we can show rather than a marketing word.
- Continuity: sub-20 millisecond hybrid inverter switchover
- Longevity: cycle life published with a residual capacity threshold
- Compatibility: verified against eight named inverter brands
- Accountability: in-country support through the PENTA-H network
- Certified to CE, UN38.3 and IEC 62619
- Warranty of five years replacement plus three years service
Find out how many Citadel cabinets your site actually needs
Send twelve months of bills and your connected load. We will model the tariff saving, the demand charge reduction and the value of continuity separately, then tell you the cabinet count that follows.
